Balance Shaft to Engine Timing (LDK, LHU)
|
Balance Shaft to Engine Timing (LDK, LHU)
|
1.
|
Install the balance shaft drive sprocket and key.
|
2.
|
Note
|
If the balance shafts are not properly timed to the engine, the engine may vibrate or make noise.
|
Install the balance shaft drive chain with the colored links lined up on with the marks on the balance shaft drive sprockets and the crankshaft sprocket. There are 3 colored links on the chain. 2 links are of matching colors, and 1 link is of a unique color. Use the following procedure to line up the links with the sprockets:
Orient the chain so that the colored links are visible.
|
3.
|
Place the uniquely colored link (1) so that it lines up with the timing mark on the intake side balance shaft sprocket.
|
4.
|
Working clockwise around the chain, place the first matching colored link (2) in line with the timing mark on the crankshaft drive sprocket - approximately at the 6 o'clock position on the crank sprocket.
|
5.
|
Place the chain (3) on the water pump drive sprocket. The alignment is not critical.
|
6.
|
Align the last matching colored link (4) with the timing mark on the exhaust side balance shaft drive sprocket.
|