Crankshaft Balancer Removal
|
Crankshaft Balancer Removal
|
Special Tools
•
|
EN-38122-A
Crankshaft Balancer Holder
|
•
|
EN-43653
Flywheel Holding Tool
|
For equivalent regional tools, refer to
Special Tools (LDK, LHU)
.
1.
|
Note
|
EN-43653
flywheel holding tool may be used instead of
EN-38122-A
crankshaft balancer holder to prevent crankshaft rotation.
|
Install
EN-38122-A
holder (1).
|
2.
|
Remove the balancer retaining bolt and washer. Use
EN-38122-A
holder and a breaker bar to prevent the crankshaft from rotating when loosening the bolt. Discard the bolt.
|
3.
|
Remove the crankshaft balancer assembly (1) using a universal removal tool.
|