Engine Block Assemble (LDK, LHU)
Engine Block Assemble (LDK, LHU) |
1. |
Install the drain plug with sealant in the water pump. Refer to Adhesives, Fluids, Lubricants, and Sealers (LDK, LHU) . |
2. |
Refer to
Fastener Caution
.
Install the coolant jacket plugs with sealant and tighten to 35 Nm (26 lb ft) . |
2.1. |
Install the rear oil channel plugs (3) with sealant and tighten to
60 Nm (44 lb ft)
.
|
2.2. |
Install the other oil channel plugs (1,2) with sealant and tighten to
35 Nm (26 lb ft)
.
|
3. |
Lubricate the crankshaft position (CKP) sensor O-ring with clean engine oil. Refer to
Adhesives, Fluids, Lubricants, and Sealers (LDK, LHU)
.
|
4. |
Install the CKP sensor (1) and bolt and tighten to
10 Nm (89 lb in)
.
|
5. |
Install the oil pressure switch (2) and tighten to
26 Nm (19 lb ft)
.
|
6. |
Install the knock sensors (1) with the bolts and tighten to
25 Nm (18 lb ft)
.
|
7. |
Install the piston's oil jets (1) and tighten to
15 Nm (11 lb ft)
.
|