Engine Prelubing
Engine Prelubing |
Special Tools |
EN-45299 Engine Preluber
For equivalent regional tools, refer to Special Tools (LDK, LHU) .
2. |
Install the M12 x 1.75 adapter (1) P/N 509376.
|
3. |
Install the flexible hose to the adapter and open the valve.
|
4. |
Pump the handle on the
EN-45299
preluber (1) in order to flow a minimum of 1-1.9 liters (1-2 quarts) of engine oil. Observe the flow of engine oil through the flexible hose and into the engine assembly.
|
5. |
Close the valve and remove the flexible hose and adapter from the engine.
|
6. |
Refer to
Fastener Caution
.
Install the oil pressure switch on the engine and tighten to 22 Nm (16 lb ft) . |
7. |
Top-off the engine oil to the proper level.
|