SAAB WIS ONLINE

Exhaust Manifold Installation (LDK, LHU)

Exhaust Manifold Installation (LDK, LHU)



1. Refer to Fastener Caution .

Install new exhaust manifold studs (1) and tighten to 15 Nm (11 lb ft) .


2. Install the exhaust manifold gasket (2).


3. Install the exhaust manifold (1) to the cylinder head.

4.
Note

Install the Torx® nut (3) in the correct location.


Install NEW exhaust manifold to cylinder head retaining nuts finger tight.

5.
Note

Use an inverted Torx® socket E16 to tighten the Torx® nut.


Tighten the NEW exhaust manifold to cylinder head retaining nuts in sequence.


5.1. Tighten the exhaust pipe nuts to 14 Nm (10 lb ft) .

5.2. Tighten the exhaust manifold nuts a second time to 14 Nm (10 lb ft) .

6. Install the exhaust manifold heat shield (1).


7. Install the exhaust manifold heat shield bolts and tighten to 25 Nm (18 lb ft) .