Fuel Rail and Injectors Removal (LDK, LHU)
Fuel Rail and Injectors Removal (LDK, LHU) |
Special Tools
• |
DT-2619-01
Slide Hammer
|
• |
EN-37281-A
Injector Remover
|
For equivalent regional tools, refer to Special Tools (LDK, LHU) .
1. |
Disconnect the electrical harness from the fuel rail harness connection.
|
2. |
Remove the fuel injector noise insulator (1).
|
4. |
Disconnect all 4 fuel injector electrical connections.
|
5. |
Remove the fuel rail bolts.
|
6. |
Remove the fuel rail and fuel injectors (1).
|
7. |
Remove the fuel injector hold-down clamp before removing the fuel injector. |
8. |
Use EN-37281-A remover (2) and DT-2619-01 slide hammer to remove the fuel injector (1). |
9. |
Remove the high pressure fuel pump bolts.
|
10. |
Remove the high pressure fuel pump (3).
|
11. |
Remove and discard the high pressure fuel pump gasket (1).
|
12. |
Remove and discard the high pressure fuel pump O-ring (2).
|
13. |
Remove the high pressure fuel pump roller lifter (1).
|