Lower Crankcase Removal

/ 9-5 (9650) / 2011 / 2. Engine / Basic engine, 2.0 l petrol / Adjustment/replacement / Lower Crankcase Removal

1.	Remove the bedplate perimeter bolts (3).

2.	Note Do not forget the 2 outside rear bolts (4). Remove and discard the crankshaft bearing bolts (2).

3.	Using the pry-points and an appropriate prying tool, gently separate the upper and lower crankcase (1).

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.