Oil Filter with Cap and Seal Installation

/ 9-5 (9650) / 2011 / 2. Engine / Basic engine, 2.0 l petrol / Adjustment/replacement / Oil Filter with Cap and Seal Installation

Special Tools

EN-44887 Oil Filter Spanner

For equivalent regional tools, refer to Special Tools (LDK, LHU) .

1.	Install a new oil filter (2) on the oil filter cap (1).

2.	Lubricate the oil filter cap O-ring with engine oil. Refer to Adhesives, Fluids, Lubricants, and Sealers (LDK, LHU) .

3.	Refer to Fastener Caution . Use the EN-44887 wrench to install the oil filter and cap. Tighten the oil filter and cap to 22 Nm (16 lb ft) .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.