Camshaft Sprocket Installation

/ 9-5 (9650) / 2011 / 2. Engine / Basic engine, 4-cylinder diesel / Adjustment/replacement / Camshaft Sprocket Installation

Special Tools

•	EN 956-1 Extension

•	EN 45059 Torque Angle Sensor Kit

•	EN-47634 Camshaft Sprocket Holding Tool

For equivalent regional tools, refer to Special Tools

1.	Install the camshaft sprocket (1).

2.	Install the EN 47634 holding tool (2) with EN 956-1 extension (3).

3.	Refer to Fastener Caution . Install the camshaft sprocket bolt and tighten to 120 Nm (89 lb ft) using the EN 45059 angle sensor.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.