SAAB WIS ONLINE

Crankshaft Balancer Cleaning and Inspection

Crankshaft Balancer Cleaning and Inspection

Cleaning Procedure


1. Clean the crankshaft balancer (1).


2. Clean the belt grooves of all dirt or debris with a wire brush.

3.
Warning

Wear safety glasses when using compressed air in order to prevent eye injury.


Dry the crankshaft balancer with compressed air.


Inspection Procedure

Inspect the crankshaft balancer for the following:


Worn, grooved, or damaged hub seal surface

A crankshaft balancer hub seal surface with excessive scoring, grooves, rust, or other damage must be replaced.

Note

In order for the belt to track properly, the belt grooves should be free of all dirt or debris.


Dirty or damaged belt grooves

The balancer belt grooves should be free of any nicks, gouges, or other damage that may not allow the belt to track properly.

Minor imperfections may be removed with a fine file.

Worn, chunking, or deteriorated rubber between the hub and pulley