Crankshaft Balancer Installation
| Crankshaft Balancer Installation |
| 1. |
Install the crankshaft balancer (1).
|
|
| 2. |
Refer to
Fastener Caution
.
Install the 4 fuel injector bracket bolts (2) and tighten to 30Nm (22 lb ft) . |
|
| 3. |
Remove the wrench to hold the crankshaft.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
