Crankshaft Rear Oil Seal Installation

/ 9-5 (9650) / 2011 / 2. Engine / Basic engine, 4-cylinder diesel / Adjustment/replacement / Crankshaft Rear Oil Seal Installation

1.	Install the NEW crankshaft rear oil seal (1).

2.	Refer to Fastener Caution . Install the 5 crankshaft rear oil seal bolts (2) and tighten to 9 Nm (80 lb in) .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.