Crankshaft Sprocket Installation

/ 9-5 (9650) / 2011 / 2. Engine / Basic engine, 4-cylinder diesel / Adjustment/replacement / Crankshaft Sprocket Installation

Special Tools

EN-46792 Crankshaft/Flywheel Holder

For equivalent regional tools, refer to Special Tools

1.	Install the EN 46792 holder (1) to hold the crankshaft.

2.	Install the crankshaft sprocket (2).

3.	Refer to Fastener Caution . Note The bolt (1) has a left-hand thread. Install the NEW crankshaft sprocket bolt (1) and tighten to 340 Nm (251 lb ft) .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.