Engine Coolant Thermostat Housing Installation

/ 9-5 (9650) / 2011 / 2. Engine / Basic engine, 4-cylinder diesel / Adjustment/replacement / Engine Coolant Thermostat Housing Installation

1.	Install the thermostat housing seal (2).

2.	Install the thermostat (1).

3.	Install the thermostat housing (3).

4.	Refer to Fastener Caution . Install the 3 thermostat housing bolts (4) and tighten to 8 Nm (71 lb in) .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.