SAAB WIS ONLINE

Engine Support Fixture (Centering Adapter)

Engine Support Fixture (Centering Adapter)



Special Tools

• CH-904 Base Frame

• CH-49289 Centring Adapter

• CH-49289-1 Frame

• CH-49289-2 Safety

• CH-49289-3 Safety

• CH-49289-4 Support Right

• CH-49289-5 Support Left

• CH-49289-6 Centering Pin

• CH-49289-7 Arm Right

• CH-49289-8 Rod Right

• CH-49289-9 Arm Left

• CH-49289-10 Rod Left

• CH-49289-11 Adapter

• CH-49289-12 Adapter

• CH-49289-13 Adapter

• CH-49289-14 Support

• CH-49290 Mounting Engine/Transmission


For equivalent regional tools, refer to Special Tools (LDK, LHU) .

Installation Procedure


1. Install the CH-904 base frame (1) to the hydraulic lift. The distance (A) has to be 40 mm (1.6 in) .


2. Install the CH-49289-2 safety (2) and CH-49289-3 safety (3) into the CH-49289 centring adapter (1).


3. Install the CH-49289 centring adapter to the CH-904 base frame.

4. Install the CH-49289-4 support right (1) to position "01".


5. Install the CH-49289-5 support left (2) to position "02".

6. Install the CH-49289-7 arm right (1) to position "04".


7. Install the CH-49289-9 arm left (2) to position "06".

8. Install the CH-49289-11 adapter (1) to position "08".


9. Install the CH-49289-11 adapter (2) to position "09".

10. Install the CH-49289-12 adapter (1) to position "15".


11. Install the CH-49289-12 adapter (2) to position "18".

12. Install the CH-49289-13 adapter (1) to position "19".


13. Install the CH-49289-13 adapter (2) to position "22".

14. Install the CH-49289-6 (1) centering pin into CH-49289-4 support right (2) to position "B".


15. Install the CH-49289-6 centering pin (3) into CH-49289-5 (4) to position "E".

16.
Note

For the removal of front suspension frame and/or engine and transmission, lower and secure CH-49289-8 rod right and CH-49289-10 rod left.


Install the CH-49289-8 rod right (1) into CH-49289-7 arm right (2) to position "H".


17. Install the CH-49289-10 rod left (3) into CH-49289-9 arm left (4) to position "M".

18. Install both CH-49289-14 support (1) into both CH-49289-11 adapter (2).


19. Install both CH-49289-14 support (3) into both CH-49289-12 adapter (4).

20. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

21. Installation in conjunction with CH-49290 mounting engine: Remove both CH-49290-6 pin (1) from the CH-49290 mounting engine/gearbox (2).


22.
Note

Do NOT raise the vehicle with the hydraulic lift. Do NOT lower the vehicle.


Raise the hydraulic lift with CH-49289 centering adapter (2) to support the front suspension frame (1).


23. Install the CH-49289 centering adapter parallel to the front suspension frame.


Removal Procedure


1. Remove the CH-49289 centering adapter (2) from the front suspension frame (1).


2. Lower the hydraulic lift with CH-49289 centring adapter.

3. Remove the CH-49289 centring adapter from the CH-904 base frame.