Exhaust Gas Recirculation Valve Cooler Installation

/ 9-5 (9650) / 2011 / 2. Engine / Basic engine, 4-cylinder diesel / Adjustment/replacement / Exhaust Gas Recirculation Valve Cooler Installation

1.	Install the NEW exhaust gas recirculation valve cooler gasket (1).

2.	Install the exhaust recirculation valve cooler (2).

3.	Install the NEW exhaust recirculation valve cooler tank gasket (1).

4.	Install the exhaust gas recirculation valve cooler tank (2).

5.	Refer to Fastener Caution . Install the 5 exhaust gas recirculation valve cooler bolts (3,4) and tighten to 9 Nm (80 lb in) .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.