Glow Plug Installation

/ 9-5 (9650) / 2011 / 2. Engine / Basic engine, 4-cylinder diesel / Adjustment/replacement / Glow Plug Installation

Special Tools

•	EN-48390 Remover/Installer for Glow Plugs 9 mm

•	EN-6104 Remover/Installer for Glow Plugs 12 mm

For equivalent regional tools, refer to Special Tools

1.	Install the 4 glow plugs (1).

2.	Refer to Fastener Caution . Install the 4 glow plugs (1) without pressure sensor using the EN-48390 installer 9 mm (0.354 in) and tighten to 8 Nm (71 lb in) .

3.	Install the 4 glow plugs (1) with pressure sensor using the EN-6104 installer 12 mm (0.0472 in) and tighten to 8 Nm (71 lb in) .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.