Power Brake Booster Pump Installation

/ 9-5 (9650) / 2011 / 2. Engine / Basic engine, 4-cylinder diesel / Adjustment/replacement / Power Brake Booster Pump Installation

Special Tools

EN 45059 Angle Sensor

1.	Install the power brake booster pump gasket.

2.	Install the power brake booster pump (2).

3.	Refer to Fastener Caution . Install the 4 NEW power brake booster pump bolts (1) and tighten in 2 passes:.

•

First pass in sequence to 5 Nm(45 lb in) .

•

Second pass to 50 ° using the EN 45059 angle sensor

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.