Drive Belt Idler Pulley Replacement

/ 9-5 (9650) / 2011 / 2. Engine / Basic engine, V6 / Adjustment/replacement / Drive Belt Idler Pulley Replacement

Removal Procedure

1.	Remove the drive belt. Refer to Drive Belt Replacement .

2.	Remove the drive belt idler pulley fastener.

3.	Remove the drive belt idler pulley.

Installation Procedure

1.	Install the drive belt idler pulley.

2.	Refer to Fastener Caution . Install the drive belt idler pulley bracket and tighten to 58 Nm (43 lb ft) .

3.	Install the drive belt. Refer to Drive Belt Replacement .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.