Engine Coolant Thermostat Housing Installation (LAU or LBW)

/ 9-5 (9650) / 2011 / 2. Engine / Basic engine, V6 / Adjustment/replacement / Engine Coolant Thermostat Housing Installation (LAU or LBW)

1.	Install the NEW engine coolant thermostat housing gasket (3).

2.	Install the engine coolant thermostat housing (2).

3.	Refer to Fastener Caution . Install the 3 engine coolant thermostat housing bolts (1) and tighten to 10 Nm (89 lb in) .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.