Hydraulic Valve Lash Adjuster Replacement - Right Side

/ 9-5 (9650) / 2011 / 2. Engine / Basic engine, V6 / Adjustment/replacement / Hydraulic Valve Lash Adjuster Replacement - Right Side

Removal Procedure

1.	Remove the applicable camshaft(s). Refer to Camshaft Replacement - Right Side .

2.	Remove the rocker arms. Refer to Valve Rocker Arm Removal - Right Side .

3.	Remove the hydraulic valve lash adjusters. Refer to Hydraulic Valve Lash Adjuster Removal - Right Side .

4.	Clean and inspect the camshaft(s), rocker arm(s) and hydraulic valve lash adjuster(s). Repair or replace as necessary. Refer to Camshaft Cleaning and Inspection and Hydraulic Valve Lash Adjuster Cleaning and Inspection .

Installation Procedure

1.	Install the hydraulic valve lash adjusters. Refer to Hydraulic Valve Lash Adjuster Installation - Right Side .

2.	Install the rocker arms. Refer to Valve Rocker Arm Installation - Right Side .

3.	Install the applicable camshaft(s). Refer to Camshaft Replacement - Right Side .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.