Oil Pan Installation
Oil Pan Installation |
1. |
Place a 3 mm (0.118 in) bead of RTV sealant on the block pan rail and the crankshaft rear oil seal housing (1). Refer to
Adhesives, Fluids, Lubricants, and Sealers
for the recommended sealant.
|
2. |
Position the oil pan (1) onto the block.
|
3. |
Loosely install the oil pan bolts (1) and (2).
|
4. |
Refer to
Fastener Caution
.
Tighten the oil pan bolts in sequence shown. |
4.1. |
Tighten the 8-mm bolts (1-11) to
25 Nm (18 lb ft)
.
|
4.2. |
Tighten the 6-mm bolts (12, 13) to
10 Nm (89 lb ft)
.
|