Oil Pump Installation
| Oil Pump Installation |
| 1. |
Align the oil pump drive gear with the crankshaft flats and install the oil pump to the engine block.
|
|
| 2. |
Align the pump body with the mounting holes in the cylinder block.
|
|
| 3. |
Refer to
Fastener Caution
.
Install the oil pump bolts and tighten to 25 Nm (18 lb ft) . |
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
