Turbocharger Oil Return Pipe Installation
| Turbocharger Oil Return Pipe Installation |
| 1. |
Install the NEW turbocharger oil return pipe seal (4).
|
|
| 2. |
Install the NEW turbocharger oil return pipe gasket (3).
|
|
| 3. |
Install the turbocharger oil return pipe (5).
|
|
| 4. |
Refer to
Fastener Caution
.
Install the 2 turbocharger oil feed pipe bolts (1) and tighten to 14 Nm (11 lb ft) . |
|
| 5. |
Install the turbocharger oil return pipe bolts (2) and tighten to
65 Nm (48 lb ft)
.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
