SAAB WIS ONLINE

Pressure Cap Testing

Pressure Cap Testing


Warning

In order to help avoid being burned, do not remove the radiator cap while the engine and the radiator are hot. Scalding fluid and steam can be blown out under pressure if the cap is removed too soon.



1. Remove the pressure cap.

2. Wash the pressure cap mating surface with water.

3. Use a cooling system pressure tester with a suitable adapter in order to test the pressure cap.

4. Test the pressure cap for the following conditions:

Pressure release when the cooling system pressure tester exceeds the pressure rating of the pressure cap

Maintain the rated pressure for at least 10 seconds.

Note the rate of pressure loss.

5. Replace the pressure cap under the following conditions:

The pressure cap does not release pressure which exceeds the rated pressure of the cap.

The pressure cap does not hold the rated pressure.