Heated Oxygen Sensor Replacement - Sensor 1 (LLU/A16LET)

Callout

Component Name

Preliminary Procedure

Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .

Heated Oxygen Sensor 1

Refer to Fastener Caution .

Disconnect the electrical connector of the heated oxygen sensor 1.

Note
When re-using the heated oxygen sensor, coat the thread with assembly paste.

24 Nm (18 lb ft)

CH 6179 (SA9603E) Oxygen Sensor Wrench Remover/Installer

For equivalent regional tools, refer to Special Tools .