SAAB WIS ONLINE

Exhaust Front Pipe Replacement (LBY/A20DTR)

Exhaust Front Pipe Replacement (LBY/A20DTR)



Callout Component Name

Preliminary Procedure

Remove the engine shield. Refer to Engine Shield Replacement

1

Exhaust Front Pipe Front Securing Fasteners (Qty: 3)

Warning

The exhaust temperature sensor and exhaust pressure differential sensor line fittings may be difficult to remove when the engine exhaust system temperature is below 48°C (120°F). Excessive force may damage the threads in the exhaust manifold or exhaust pipe.


Refer to Fastener Caution .

Tighten

23 Nm (17 lb ft)

2

Exhaust Front Pipe Rear Securing Fasteners (Qty: 3)

Tighten

23 Nm (17 lb ft)

3

Exhaust Front Pipe


Procedure

1. Disconnect the exhaust front pipe from rubber mounting.

2. Install NEW exhaust front pipe gaskets front and rear.