SAAB WIS ONLINE

Exhaust Heat Shield Replacement (LBS/A20DTH)

Exhaust Heat Shield Replacement (LBS/A20DTH)



Callout Component Name

Preliminary Procedure

1. Remove the exhaust manifold heat shield. Refer to Exhaust Manifold Heat Shield Replacement (LBS/A20DTH) Exhaust Manifold Heat Shield Replacement (LBY/A20DTR) Exhaust Manifold Heat Shield Replacement (LLU/A16LET) Exhaust Manifold Heat Shield Replacement (LHU/A20NFT)

2. Remove the exhaust temperature sensor in position 1. Refer to Exhaust Temperature Sensor Replacement - Position 1 (LBY/A20DTR) Exhaust Temperature Sensor Replacement - Position 1 (LBS/A20DTH) .

3. Remove the heated oxygen sensor 1. Refer to Heated Oxygen Sensor Replacement - Sensor 1


1

Exhaust Heat Shield Fastener (Qty: 6)

Refer to Fastener Caution .

Tighten

9 Nm (77 lb in)

2

Exhaust Heat Shield