SAAB WIS ONLINE

Exhaust Particulate Filter Replacement (LBY/A20DTR All Wheel Drive)

Exhaust Particulate Filter Replacement (LBY/A20DTR All Wheel Drive)



Callout Component Name

Preliminary Procedure

Remove the exhaust temperature sensor-position 2. Refer to Exhaust Temperature Sensor Replacement - Position 2 (LBY/A20DTR) .

1

Exhaust Pressure Sensor Hose

2

Exhaust Particulate Filter Fasteners (Qty: 3)

Refer to Fastener Caution .

Tighten

22 Nm (16 lb ft)

3

Exhaust Particulate Filter Fasteners (Qty: 2)

Tighten

18 Nm (13 lb ft)

4

Exhaust Particulate Filter

Note

After replacement, activate DPF Reset with diagnostic tool.



Procedure

1. Remove the exhaust particulate filter from rubber mounting.

2. Replace exhaust particulate filter gaskets front and rear.