Steering Column Lock Control Module Programming and Setup
|
Steering Column Lock Control Module Programming and Setup
|
The following service procedures require either a programming or a setup event performed for a complete repair.
Steering Column Lock Control Module Replacement
|
If the steering column lock control module needs to be replaced, the following procedures must be performed:
2.
|
Perform the SPS function Steering Column Lock Control Module - Programming and follow the on-screen instructions.
|
3.
|
Perform the SPS function Steering Column Lock Control Module - Configuration & Setup and follow the on-screen instructions. On the screen Control Module - Configuration and Setup Function(s), select both ECU Configuration/Reconfiguration and ECU Setup.
|
4.
|
Clear DTCs after completing the programming procedure.
|
Steering Column Lock Control Module Reprogramming
|
If the steering column lock control module needs to be reprogrammed, the following procedures must be performed:
2.
|
Perform the SPS function Steering Column Lock Control Module - Programming and follow the on-screen instructions.
|
3.
|
Clear DTCs after completing the programming procedure.
|