Digital Radio Receiver Scan Tool Information
| Digital Radio Receiver Scan Tool Information |
Digital Audio Broadcast Scan Tool Parameters
| Parameter | Expected Value | Definition |
|
Operating Conditions:
Ignition ON
|
||
|
Antenna Signal Strength
|
Varies
|
The scan tool displays the Antenna Signal Strength in dBm.
|
|
End Model Part Number
|
Varies
|
The scan tool displays the End Model Part Number.
|
|
Base Model Part Number
|
Varies
|
The scan tool displays the Base Model Part Number.
|
|
End Model Part Number Alpha Code
|
Varies
|
The scan tool displays the End Model Part Number Alpha Code.
|
|
Diagnostic Data Identifier
|
Varies
|
The scan tool displays the Diagnostic Data Identifier.
|
|
Vehicle Identification Number (VIN)
|
Varies
|
The scan tool displays the Vehicle Identification Number (VIN).
|
|
Mechanical Key Code
|
Varies
|
The scan tool displays the Mechanical Key Code.
|
|
Module Diagnostic Address
|
Varies
|
The scan tool displays the Module Diagnostic Address.
|
|
Date Programmed
|
Varies
|
The scan tool displays the Date Programmed.
|
Digital Audio Broadcast Detection Module Output Controls
| Scan Tool Output Control | Description |
|
Audio Tone
|
This output controls a low test tone on left and right audio channels in order to check the audio between the Digital Audio Broadcast Module and the radio. Pressing left button a tone with 1 KHz can be heard out of the left speakers. Pressing right button a tone with 1 KHz can be heard out of the right speaker.
|
|
CAN Bus Configuration Learn
|
This output control will enable the module to learn the serial data speed and adapt to it.
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
