Electronic Suspension Control Module Scan Tool Information
| Electronic Suspension Control Module Scan Tool Information |
The electronic suspension control module scan tool data parameters list contains all suspension control related parameters that are available on the scan tool. The list is arranged in alphabetical order. A given parameter may appear in any one of the data lists.
Electronic Suspension Control Module Scan Tool Data Parameters
| Parameter | System State | Expected Value | Description |
|
Operating Conditions:
Ignition ON
|
|||
|
Battery Voltage
|
-
|
11-14 V
|
The scan tool displays V. This is the current battery voltage.
|
|
Left Front Damper Actuator Command
|
-
|
varies
|
The scan tool displays mA. This is the current applied to the left front damper actuator.
|
|
Left Front Vertical Body Acceleration
|
-
|
0 m/s
2
|
The scan tool displays m/s
2
. This is the signal from the left front body acceleration sensor.
|
|
Left Front Vertical Wheel Acceleration
|
-
|
0 m/s
2
|
The scan tool displays m/s
2
. This is the signal from the left front wheel acceleration sensor.
|
|
Left Rear Damper Actuator Command
|
-
|
varies
|
The scan tool displays mA. This is the current applied to the left rear damper actuator.
|
|
Rear Vertical Body Acceleration
|
-
|
0 m/s
2
|
The scan tool displays m/s
2
. This is the signal from the rear body acceleration sensor.
|
|
Right Front Damper Actuator Command
|
-
|
varies
|
The scan tool displays mA. This is the current applied to the right front damper actuator.
|
|
Right Front Vertical Body Acceleration
|
-
|
0 m/s
2
|
The scan tool displays m/s
2
. This is the signal from the right front body acceleration sensor.
|
|
Right Front Vertical Wheel Acceleration
|
-
|
0 m/s
2
|
The scan tool displays m/s
2
. This is the signal from the right front wheel acceleration sensor.
|
|
Right Rear Damper Actuator Command
|
-
|
varies
|
The scan tool displays mA. This is the current applied to the right rear damper actuator.
|
|
Suspension Position Sensor 5 V Reference
|
-
|
4.8-5.2 V
|
The scan tool displays V. This is the wheel and body acceleration sensors supply voltage.
|
|
Suspension System Mode
|
-
|
Normal
|
The scan tool displays Normal, Comfort or Sport Mode depending on the selected mode.
|
|
Tour mode switch pressed
|
Comfort
|
||
|
Sport mode switch pressed
|
Sport Mode
|
||
|
Vehicle Speed
|
-
|
0 km/h (0 MPH)
|
The scan tool displays km/h (MPH) depending on the current speed of the vehicle.
|
Electronic Suspension Control Module Scan Tool Output Controls
| Output Control | Description |
|
Left Front Damper Actuator
|
Commands the current applied to the left front damper actuator Increase or Decrease.
|
|
Left Rear Damper Actuator
|
Commands the current applied to the left rear damper actuator Increase or Decrease.
|
|
Right Front Damper Actuator
|
Commands the current applied to the right front damper actuator Increase or Decrease.
|
|
Right Rear Damper Actuator
|
Commands the current applied to the right rear damper actuator Increase or Decrease.
|
|
Suspension System Mode
|
Commands the electronic suspension system Comfort, Sport Mode, Normal, Hard.
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
