Headlamp Control Module Scan Tool Information
| Headlamp Control Module Scan Tool Information |
The headlamp control module scan tool data parameters list contains all headlamp related parameters that are available on the scan tool. The list is arranged in alphabetical order. A given parameter may appear in any one of the data lists.
Headlamp Control Module Scan Tool Data Parameters
| Parameter | System State | Expected Value | Description |
|
Operating Conditions:
Ignition ON
|
|||
|
Accelerator Pedal Position
|
-
|
-
|
The scan tool displays the position of the accelerator pedal in %.
|
|
Battery Voltage
|
-
|
9.0-14.0 V
|
The scan tool displays the current battery voltage.
|
|
Front Levelling Position Sensor
|
-
|
-
|
The scan tool displays the position of the front levelling sensor in mm.
|
|
Headlamp Light Distribution
|
-
|
Inactive
|
The scan tool displays the current light distribution mode.
|
|
-
|
Country Road
|
||
|
-
|
City Street
|
||
|
-
|
Expressway
|
||
|
-
|
Bad Weather
|
||
|
-
|
High Beams
|
||
|
Left Headlamp Horizontal Motor
|
-
|
-
|
The scan tool displays the position of the left headlamp horizontal motor in °.
|
|
Left Headlamp Vertical Motor
|
-
|
-
|
The scan tool displays the position of the left headlamp vertical motor in %.
|
|
Rear Levelling Position Sensor
|
-
|
-
|
The scan tool displays the position of the rear levelling sensor in mm.
|
|
Right Headlamp Horizontal Motor
|
-
|
-
|
The scan tool displays the position of the right headlamp horizontal motor in °.
|
|
Right Headlamp Vertical Motor
|
-
|
-
|
The scan tool displays the position of the right headlamp vertical motor in %.
|
|
Low Beam Illumination Area
|
-
|
Left Hand Traffic
|
The scan tool displays the current traffic mode.
|
|
-
|
Right Hand Traffic
|
||
|
Steering Wheel Angle Sensor Signal
|
-
|
-
|
The scan tool displays the current position of the steering wheel angle sensor in °.
|
|
Vehicle Levelling Sensors Supply Voltage
|
-
|
9.0-13.0 V
|
The scan tool displays the current levelling sensor supply voltage.
|
|
Vehicle Speed
|
-
|
-
|
The scan tool displays the vehicle speed in km/h (MPH).
|
Headlamp Control Module Scan Tool Output Controls
| Output Control | Description |
|
Headlamp Light Distribution
|
Commands the headlamps to the appropriate distribution.
|
|
Headlamps High Intensity Discharge Power Increase
|
Commands the discharge power Increase or Decrease.
|
|
Left Cornering Lamp
|
Commands the cornering lamp Increase or Decrease.
|
|
Left Headlamp Horizontal Motor
|
Commands the horizontal motor Increase or Decrease.
|
|
Left Headlamp Vertical Motor
|
Commands the vertical motor Increase or Decrease.
|
|
Right Cornering Lamp
|
Commands the cornering lamp Increase or Decrease.
|
|
Right Headlamp Horizontal Motor
|
Commands the horizontal motor Increase or Decrease.
|
|
Right Headlamp Vertical Motor
|
Commands the vertical motor Increase or Decrease.
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
