Parameter
|
Expected Value
|
Definition
|
Operating Conditions:
Ignition ON/Engine OFF/Radio ON
|
GM Part Number
|
Varies
|
The scan tool displays the part number.
|
Calibration Part Number 1
|
Varies
|
The scan tool displays the primary software part number.
|
Calibration Part Number 2
|
Varies
|
The scan tool displays the primary calibration part number
|
Battery Voltage
|
Varies
|
The scan tool displays volts. This is the voltage input supplied to the Multimedia Player Interface Module.
|
USB Device Detection
|
Inactive
|
The scan tool displays Active or Inactive. Being active indicates a USB device is connected.
|
Aux IN Detection
|
Inactive
|
The scan tool displays Active or Inactive.
Sensing & Status. This parameter displays active when a device present on AUX In (ministereo plug).
|
USB Overcurrent Protection
|
Inactive
|
The scan tool displays Active or Inactive. USB over current detection indicates a USB device is drawing too much current and the USB functionality of the device is turned OFF.
|
Bluetooth Device Detection
|
Inactive
|
The scan tool displays Active or Inactive. Active indicates a Bluetooth device connected.
|
Mute Status
|
Mute OFF
|
The scan tool displays Mute OFF or Mute ON. This parameter displays the status of the mute.
|
Audio Source Status
|
Internal
|
The scan tool displays Internal Source, AUX or Bluetooth. This parameter displays the source of the audio.
|
USB Power Status
|
Off
|
The scan tool displays OFF or ON. This is the status of the USB power.
|
Connected Device Type 1
|
None
|
The scan tool displays None, USB Mass Storage Device, USB Media Transfer Protocol Device, Media Player - iPod, Bluetooth, AUX, Media Player - Zune, or Device Inserted But Not Supported. This parameter displays the type of auxiliary input source connected.
|
Connected Device Type 2
|
None
|
The scan tool displays None, USB Mass Storage Device, USB Media Transfer Protocol Device, Media Player - iPod, Bluetooth, AUX, Media Player - Zune, or Device Inserted But Not Supported. This parameter displays the type of auxiliary input source connected.
|
Connected Device Type 3
|
None
|
The scan tool displays None, USB Mass Storage Device, USB Media Transfer Protocol Device, Media Player - iPod, Bluetooth, AUX, Media Player - Zune, or Device Inserted But Not Supported. This parameter displays the type of auxiliary input source connected.
|
Connected Device Type 4
|
None
|
The scan tool displays None, USB Mass Storage Device, USB Media Transfer Protocol Device, Media Player - iPod, Bluetooth, AUX, Media Player - Zune, or Device Inserted But Not Supported. This parameter displays the type of auxiliary input source connected.
|
Bluetooth Signal Strength
|
DB
|
The scan tool displays the signal strength of the Bluetooth connection.
|