Object Alarm Module Scan Tool Information
| Object Alarm Module Scan Tool Information |
Object Alarm Module Scan Tool Data Parameters
| Parameter | System State | Expected Value | Description |
|
Operating Conditions:
Ignition ON/Engine OFF/Parking Assist ON
|
|||
|
Advanced Park Assist Switch
|
Advanced parking assist switch released
|
Inactive
|
The scan tool displays Inactive or Active depending on the advanced parking assist switch state.
|
|
Advanced parking assist switch pressed
|
Active
|
||
|
Battery Voltage
|
-
|
11-14 V
|
The scan tool displays V. This is the current battery voltage.
|
|
Calculated Transmission Range
|
Transmission in reverse
|
Reverse
|
The scan tool displays Park, Reverse, Neutral, Drive or Unknown depending on the state of the commanded gear.
|
|
Obstacle Detected
|
-
|
No
|
Diagnostic tool shows Yes or No. Yes is shown if there is an object within the measuring range of the object sensors.
|
|
Park Assist Chime
|
-
|
Varies
|
The scan tool displays On or Off. On is displayed if there is an object within the measuring range of the object sensors.
|
|
Park Assist Disable History 1
|
-
|
Varies
|
The scan tool displays None, Manual Disable, Park Brake Applied, Trailer or Other Attached Object, Excessive Speed in Reverse, No or Invalid Sensor Signals, Sensor Disturbance, Sensors Dirty, Sound Signal Return Time Not Plausible. This is the state of the park assist disable history.
|
|
Park Assist Disable History 2
|
-
|
Varies
|
The scan tool displays None, Manual Disable, Park Brake Applied, Trailer or Other Attached Object, Excessive Speed in Reverse, No or Invalid Sensor Signals, Sensor Disturbance, Sensors Dirty, Sound Signal Return Time Not Plausible. This is the state of the park assist disable history.
|
|
Park Assist Disable History 3
|
-
|
Varies
|
The scan tool displays None, Manual Disable, Park Brake Applied, Trailer or Other Attached Object, Excessive Speed in Reverse, No or Invalid Sensor Signals, Sensor Disturbance, Sensors Dirty, Sound Signal Return Time Not Plausible. This is the state of the park assist disable history.
|
|
Park Assist Disable History 4
|
-
|
Varies
|
The scan tool displays None, Manual Disable, Park Brake Applied, Trailer or Other Attached Object, Excessive Speed in Reverse, No or Invalid Sensor Signals, Sensor Disturbance, Sensors Dirty, Sound Signal Return Time Not Plausible. This is the state of the park assist disable history.
|
|
Park Assist Disable History 5
|
-
|
Varies
|
The scan tool displays None, Manual Disable, Park Brake Applied, Trailer or Other Attached Object, Excessive Speed in Reverse, No or Invalid Sensor Signals, Sensor Disturbance, Sensors Dirty, Sound Signal Return Time Not Plausible. This is the state of the park assist disable history.
|
|
Park Assist Disable History 6
|
-
|
Varies
|
The scan tool displays None, Manual Disable, Park Brake Applied, Trailer or Other Attached Object, Excessive Speed in Reverse, No or Invalid Sensor Signals, Sensor Disturbance, Sensors Dirty, Sound Signal Return Time Not Plausible. This is the state of the park assist disable history.
|
|
Park Assist Disable History 7
|
-
|
Varies
|
The scan tool displays None, Manual Disable, Park Brake Applied, Trailer or Other Attached Object, Excessive Speed in Reverse, No or Invalid Sensor Signals, Sensor Disturbance, Sensors Dirty, Sound Signal Return Time Not Plausible. This is the state of the park assist disable history.
|
|
Park Assist Sensor
|
-
|
On
|
The scan tool displays On or Off.
|
|
Park Assist Sensor Reference Voltage
|
-
|
7.3-9.1 V
|
The scan tool displays V. This is the amount of voltage being sent to the object sensors.
|
|
Park Assist Switch
|
Parking assist switch released
|
Inactive
|
The scan tool displays Inactive or Active depending on the parking assist switch state.
|
|
Parking assist switch pressed
|
Active
|
||
|
Park Assist Switch LED
|
Parking assist ON
|
On
|
The scan tool displays On or Off. This is the state of the parking assist switch indicator.
|
|
Parking assist OFF
|
Off
|
||
|
Park Assist System Status
|
-
|
Enable
|
The scan tool displays Disable, Enable, Inhibited or Failed. This is the state of the parking assist system.
|
|
Power Moding
|
-
|
Run
|
The scan tool displays Off, Accessory, Run or Crank. This is the state of the ignition switch.
|
Object Alarm Module Scan Tool Output Controls
| Output Control | Description |
|
Clear Disable History Data
|
The object alarm module clears the park assist disable history when commanded from the scan tool.
|
|
Park Assist Switch LED
|
The object alarm module illuminates the parking assist switch indicator when commanded from the scan tool.
|
|
Advance Park Assist LED
|
The object alarm module illuminates the advanced parking assist switch indicator when commanded from the scan tool.
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
