Rear Differential Clutch Control Module Scan Tool Information
Rear Differential Clutch Control Module Scan Tool Information |
Rear Differential Clutch Control Module Scan Tool Data Parameters
Parameter | Expected Value | Description |
Operating Conditions:
Ignition is ON, engine OFF, and the vehicle is stationary.
|
||
Left Front Wheel Speed Sensor
|
0
|
The scan tool displays 0-160 km/h (0-99.5 MPH). The scan tool displays 0 km/h (0 MPH) when the vehicle is not moving or is moving at speeds less than or equal to 0 km/h (0 MPH).
|
Left Rear Wheel Speed Sensor
|
0
|
The scan tool displays 0-160 km/h (0-99.5 MPH). The scan tool displays 0 km/h (0 MPH) when the vehicle is not moving or is moving at speeds less than or equal to 0 km/h (0 MPH).
|
Rear Differential Clutch Control Module Temperature
|
Varies
|
The scan tool displays °C. The scan tool indicates a range from -40 to 215 °C.
|
Rear Differential Clutch Pump Motor Current
|
0
|
The scan tool displays the current in mA through the pump motor.
|
Rear Differential Clutch Solenoid Valve Current
|
0
|
The scan tool displays the current in mA through the rear differential clutch solenoid valve.
|
Rear Differential Clutch Status
|
Temporarily Disabled
|
The scan tool displays either Normal, Temporarily Disabled, Temporarily Limited, Malfunctioned, or Externally Disabled.
|
Rear Drive Clutch Solenoid Valve Current
|
0
|
The scan tool displays the current in mA through the rear drive clutch solenoid valve.
|
Rear Drive Clutch Status
|
Temporarily Disabled
|
The scan tool displays either Normal, Temporarily Disabled, Temporarily Limited, Malfunctioned, or Externally Disabled.
|
Right Front Wheel Speed Sensor
|
0
|
The scan tool displays 0-160 km/h (0-99.5 MPH). The scan tool displays 0 km/h (0 MPH) when the vehicle is not moving or is moving at speeds less than or equal to 0 km/h (0 MPH).
|
Right Rear Wheel Speed Sensor
|
0
|
The scan tool displays 0-160 km/h (0-99.5 MPH). The scan tool displays 0 km/h (0 MPH) when the vehicle is not moving or is moving at speeds less than or equal to 0 km/h (0 MPH).
|
Rear Differential Clutch Control Module Scan Tool Output Controls
Output Control | Description |
Pump Motor
|
This function allows the technician to command the pump motor ON and OFF.
|
Rear Differential Clutch Solenoid Valve
|
This function allows the technician to command the clutch solenoid valve. The system will increase or decrease the current in increments of 200 mA
|
Rear Drive Clutch Solenoid Valve
|
This function allows the technician to command the clutch solenoid valve. The system will increase or decrease the current in increments of 200 mA
|