SAAB WIS ONLINE

Vehicle Direction Alert Alarm Warning Module Scan Tool Information

Vehicle Direction Alert Alarm Warning Module Scan Tool Information


Vehicle Direction Alert Alarm Warning Module Scan Tool Data Parameters

Parameter System State Expected Value Description
Operating Conditions: Ignition ON/Engine OFF/Lane Departure Warning ON

System Voltage

-

Varies

The scan tool displays Undefined, Low, Normal or High depending of the current battery voltage.

Vehicle Direction Camera Calibration Status

-

Varies

The scan tool displays Calibrated, Calibration Mode, Error or Not Calibrated. This is the current state of the calibration.

Vehicle Direction Camera Indicator Status

Lane Departure Warning System activated

On

The scan tool displays Off, On or Error depending on the state of the lane departure warning system.

Lane Departure Warning System deactivated

Off

Vehicle Direction Camera Switch Status

Lane Departure Warning Switch pressed

Closed

The scan tool displays Open, Closed or Error depending on the state of the lane departure warning switch.

Lane Departure Warning Switch released

Open

Vehicle Direction Camera System Status

-

Varies

The scan tool displays Off, Initializing, Active, Shutdown Mode or Fail-Safe Mode depending on the state of the lane departure warning system.




Vehicle Direction Alert Alarm Warning Module Scan Tool Output Controls

Output Control Description
Traffic Sign Indicator Test

The vehicle direction camera control module initialize a test sequence for the indicator when commanded from the scan tool.