SAAB WIS ONLINE

Generator Replacement (LAU/A28NER)

Generator Replacement (LAU/A28NER)



Callout Component Name

Preliminary Procedure

1. Remove the secondary air injection inlet pipe. Refer to Secondary Air Injection Pump Replacement .

2. Remove the charge air cooler outlet hose. Refer to Charge Air Cooler Outlet Hose Replacement (Diesel) Charge Air Cooler Outlet Hose Replacement (LAU/A28NER) Charge Air Cooler Outlet Hose Replacement (LLU/A16LET) .

3. Drain the cooling system. Refer to Cooling System Draining and Filling (LAU/A28NER) Cooling System Draining and Filling (LBS/A20DTH) Cooling System Draining and Filling (LHU/A20NFT) .

4. Remove the drive belt from the pulley belt idler. Refer to Drive Belt Replacement .

5. Remove the front bumper fascia center support bracket. Refer to Front Bumper Fascia Center Support Bracket Replacement .

6. Remove the radiator upper bracket. Refer to Radiator Replacement (Diesel) Radiator Replacement (LAU/A28NER) Radiator Replacement (LHU/A20NFT) .


1

Generator Pulley Belt Idler Fastener

Refer to Fastener Caution .

Tighten

15 Nm (11 lb ft)

2

Generator Pulley Belt Idler

3

Generator Wiring Harness Connector


Procedure

1. Disconnect the electrical connector.

2. Remove the wiring harness fastener.


4

Generator Fastener (Qty: 2)

Tighten

35 Nm (25 lb ft)

5

Generator


Procedure

1. Remove the charge air cooler outlet duct bracket.

2. Remove the engine oil cooler hose from engine oil cooler pipe.