SAAB WIS ONLINE

Measuring Voltage Drop

Measuring Voltage Drop


Special Tools

EL 39200 Digital Multimeter (DMM)

For equivalent regional tools, refer to Special Tools .

Refer to Test Probe Caution

The following procedure determines the difference in voltage potential between 2 points.



1. Set the Digital Multimeter (DMM) to the V (DC) position.

2. Connect the positive lead of the DMM to the point of the circuit to be tested.

3. Connect the negative lead of the DMM to the other point of the circuit.

4. Operate the circuit.

5. The DMM displays the difference in voltage between the 2 points.