Using Fused Jumper Wires

/ 9-5 (9650) / 2011 / 3. Electrical System / Wiring harness and components / Fault diagnosis, general / Using Fused Jumper Wires

Special Tools

J 36169-A Fused Jumper Wire

Note

A fused jumper may not protect solid state components from being damaged.

The J 36169-A includes small clamp connectors that provide adaptation to most connectors without damage. This fused jumper wire is supplied with a 20-A fuse which may not be suitable for some circuits. Do not use a fuse with a higher rating than the fuse that protects the circuit being tested.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.