Manual Transmission Shift Lever Cable Replacement
Manual Transmission Shift Lever Cable Replacement |
Special Tools
DT-6042-A Dismantling KeyFor equivalent regional tools, refer to Special Tools .
Removal Procedure |
1. |
Remove the battery tray. Refer to
Battery Tray Replacement (Diesel)
Battery Tray Replacement (LHU/A20NFT)
.
|
2. |
Remove shift lever and selector lever cable (2) from transmission control housing (4) using
DT-6042-A
dismantling key (3).
|
3. |
Remove shift lever and selector lever cable from shift lever and selector lever cable bracket (1) by pushing back locking rings in counter driving direction.
|
4. |
Remove shift lever and selector lever cable (3) from bulkhead.
|
5. |
Remove the front floor console. Refer to
Front Floor Console Replacement
.
|
6. |
Unlock shift lever and selector lever cable adjust locks (2).
|
7. |
Clip shift lever and selector lever cable (3) out of transmission control lever housing (1).
|
Installation Procedure |
1. |
Slide shift lever and selector lever cable into shift lever and selector lever cable adjust locks (2). |
2. |
Clip shift lever and selector lever cable (3) into transmission control lever housing (1).
|
3. |
Install shift lever and selector lever cable from inside the vehicle.
|
4. |
Install shift lever and selector lever cable (3) to bulkhead. |
5. |
Check for correct fit.
|
6. |
Install shift lever and selector lever cable (2) to shift lever and selector lever cable bracket (1).
|
7. |
Install shift lever and selector lever cable to transmission control housing (3).
|
8. |
Install the battery tray. Refer to
Battery Tray Replacement (Diesel)
Battery Tray Replacement (LHU/A20NFT)
.
|
9. |
Adjust shift lever and selector lever cable. Refer to
Manual Transmission Shift Lever Cable Adjustment
.
|
10. |
Install the front floor console. Refer to
Front Floor Console Replacement
.
|