Transmission Control Lever Boot Replacement
|
|
Transmission Control Lever Boot Replacement
|
|
1.
|
Remove transmission control lever boot (1) from front floor console, gently pulling boot frame on front side upwards.
|
|
2.
|
Slide transmission control lever boot upwards.
|
|
3.
|
Press 2 latches (arrows).
|
|
4.
|
Slide blue transmission control lever retainer ring (1) upwards.
|
|
5.
|
Pull trigger (2) upwards.
|
|
6.
|
Remove the lever knob.
|
|
7.
|
Press pull latch (1) in direction of arrows.
|
|
8.
|
Remove reverse gear block (2) from transmission control lever knob.
|
|
1.
|
Install reverse gear block (2) to transmission control lever knob.
|
|
2.
|
Let the hook (1) engage hearable (arrow).
|
|
3.
|
Install transmission control lever knob.
|
|
4.
|
Push trigger (2) upwards.
|
|
5.
|
Press the transmission control lever knob during installation completely down.
|
|
6.
|
Slide blue transmission control lever retainer ring (1) downwards.
|
|
7.
|
Clip transmission control lever boot (1) into front floor console.
|
