Differential Carrier Bushing Replacement - Rear
|
Differential Carrier Bushing Replacement - Rear
|
Callout
|
Component Name
|
Preliminary Procedure
Remove the differential carrier assembly. Refer to
Differential Carrier Assembly Replacement
.
|
1
|
Differential Carrier Bushing - Rear (Qty: 2)
Procedure
1.
|
Clean the bushing hole from paint and dirt before pressing out the bushing.
|
2.
|
Fit
CH-49158-1
presstool and
CH-49158-2
presstool together with the hydraulic press tool.
|
3.
|
Align the tools and press out the rubber bushing.
|
4.
|
On installation grind away any residue from the old bushing with emery cloth.
|
5.
|
Fit the rubber bushing in the housing and press the bushing into the housing with suitable presstool and
CH-49158-4
together with the hydraulic tool. Align the tools and bushing accurately before pressing in the bushing.
|
Special Tools
CH-49158
Presstool Kit
For equivalent regional tools, refer to
Special Tools
.
|