SAAB WIS ONLINE

Differential Clutch Seal Replacement (Inner)

Differential Clutch Seal Replacement (Inner)



Callout Component Name

Preliminary Procedure

Remove the differential clutch. Refer to Differential Clutch Replacement .

1

Differential Clutch Seal Inner


Procedure

1. Fasten a 13 mm open end wrench to the Differential Clutch Housing according the picture.

2. Press out the seal with a screwdriver. Exercise care so as not to damage the housing.

3. Remove the open end wrench.

4. Press the seal into the differential clutch housing by using special tools DT-8791352 and DT-8390114 and a hydraulic press.

5. The seal shall be flush with the axle.

6. Use lubricant to fit the seal. Refer to Adhesives, Fluids, Lubricants, and Sealers .



Special Tools

• DT- 8791352 Pressing Sleeve

• DT-8390114 Sleeve, Drive Gear


For equivalent regional tools, refer to Special Tools .