Rear Output Shaft Flange Seal Removal

/ 9-5 (9650) / 2011 / 4. Transmission / All-wheel drive / Adjustment/replacement / Rear Output Shaft Flange Seal Removal

1.	Remove the 7 transfer case rear output shaft flange bolts (1).

2.	Remove the transfer case rear output shaft flange (2).

3.	Remove the transfer case rear output shaft flange seal (3).

4.	Clean all mating surfaces.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.