SAAB WIS ONLINE

Transmission Rear Mount Replacement

Transmission Rear Mount Replacement



Callout Component Name

Preliminary Procedure

1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .

2. Remove the engine shield. Refer to Engine Shield Replacement .

3. All Wheel Drive (AWD): Lower the subframe approx. 10 cm. Refer to Drivetrain and Front Suspension Frame Front Crossmember Replacement (GNA) Drivetrain and Front Suspension Frame Front Crossmember Replacement (GNB) .


1

Transmission Rear Mount Fastener (Qty: 3)

Refer to Fastener Caution .

Tighten

100 Nm (74 lb ft)

2

Transmission Rear Mount Fastener

Tighten

62 Nm (46 lb ft)

3

Transmission Rear Mount Fastener (Qty: 2)

Tighten

100 Nm (74 lb ft)

4

Transmission Rear Mount