Front Brake Rotor Replacement (J60, J61, J62)
|
|
Front Brake Rotor Replacement (J60, J61, J62)
|
|
Callout
|
Component Name
|
Refer to
Brake Dust Warning
.
Preliminary Procedure
|
1
|
Bracket Bolt (Qty: 2)
Refer to
Fastener Caution
.
Procedure
Install NEW bolts.
Tighten
150 Nm (111 lb ft) + 45 degrees + 15 degrees
|
2
|
Front Brake Caliper And Bracket Assembly
Warning
|
|
Do not depress the brake pedal with the brake rotors and/or the brake drums removed, or with the brake calipers repositioned away from the brake rotors, or damage to the brake system may result.
|
|
|
|
|
|
Procedure
Without disconnecting the hydraulic brake flexible hose, pivot the caliper and bracket assembly upward and secure with heavy mechanics wire, or equivalent.
|
Note
|
|
Do NOT disconnect the hydraulic brake flexible hose from the caliper.
|
|
3
|
Brake Rotor Bolt
Tighten
7 Nm (62 lb in)
|
4
|
Front Brake Rotor
|
Warning
|
|
Whenever the brake rotor has been separated from the wheel bearing flange, clean any rust or foreign material from the mating surface of the rotor and flange with the CH 42450 hub cleaning kit. Failure to do this may result in increased lateral runout of the rotor and brake pulsation.
|
|
|
|
|
|
Procedure
Clean the hub/axle flange and the brake rotor mating surfaces from any rust or corrosion.
|
