|
Step
|
Action
|
Yes
|
No
|
DEFINITION: Brake system does not fully release or has delayed release; vehicle motion may be hindered by brake system without applying brakes.
|
1
|
Were you sent here from the Hydraulic Brake Symptom table?
|
Go to
|
Go to
Symptoms - Hydraulic Brakes
|
2
|
Is the vehicle equipped with an adjustable stop lamp switch and/or an adjustable cruise control release switch?
|
Go to
|
Go to
|
3
|
|
1.
|
Inspect the stop lamp switch for proper adjustment to ensure that the brake pedal is fully releasing.
|
|
2.
|
Inspect the cruise control release switch, if equipped, for proper adjustment to ensure that the brake pedal is fully releasing.
|
Did you find and correct a condition?
|
Go to
|
Go to
|
4
|
Inspect the park brake system for proper operation. Refer to
Park Brake System Diagnosis
.
Did you find and correct a condition?
|
Go to
|
Go to
|
5
|
|
1.
|
Inspect the disc brake system for the following conditions.
|
|
|
•
|
Binding, incorrectly installed or missing caliper hardware and/or lining hardware-Ensure free movement of linings and of caliper, if equipped with sliding type caliper
|
|
|
•
|
Lack of lubrication or excessive corrosion on metal to metal contact surfaces
|
|
|
•
|
Distorted or damaged linings
|
|
|
•
|
Damaged or excessively worn caliper hardware and/or lining hardware
|
|
|
•
|
Bent or damaged caliper or mounting component
|
Did you find and correct a condition?
|
Go to
|
Go to
|
6
|
|
1.
|
Separate the brake booster pushrod from the brake pedal.
|
|
2.
|
Inspect the brake corners to determine if the brake drag condition is still present.
|
Do the brake corners still exhibit the brake drag condition?
|
Go to
|
Go to
|
7
|
|
1.
|
Inspect the pushrod for improper positioning and/or damage. Correctly position or replace the pushrod if necessary.
|
|
2.
|
Inspect the brake pedal assembly for damage and replace if necessary.
|
Did you complete the repair or replacement?
|
Go to
|
-
|
8
|
|
1.
|
For vacuum boost systems, disconnect the vacuum check valve from the booster to relieve vacuum reserve.
|
|
2.
|
Separate the master cylinder from the brake booster. Do not disconnect any brake pipes.
|
|
3.
|
Inspect the brake corners to determine if the brake drag condition is still present.
|
Do the brake corners still exhibit the brake drag condition?
|
Go to
|
Go to
|
9
|
Replace the brake booster assembly.
Did you complete the replacement?
|
Go to
|
-
|
10
|
|
1.
|
Inspect the hydraulic brake system for the following conditions.
|
|
|
•
|
Improper operation of caliper pistons
|
|
|
•
|
Contaminated brake fluid
|
|
|
•
|
Internally damaged flexible brake hoses; hindering brake release
|
|
|
•
|
Damaged or improperly operating master cylinder
|
Did you find and correct a condition?
|
Go to
|
Go to
Symptoms - Hydraulic Brakes
|
11
|
|
1.
|
Install or connect any components that were removed or disconnected during diagnosis.
|
Is the condition still present?
|
Go to
|
System OK
|
