SAAB WIS ONLINE

Power Steering Pump Replacement (V6)

Power Steering Pump Replacement (V6)



Callout Component Name

Preliminary Procedure

1. Remove the right front tire and wheel. Refer to Tire and Wheel Removal and Installation .

2. Remove the drive belt. Refer to Drive Belt Replacement .

3. Place drain pans under the vehicle.

4. Remove as much power steering fluid from the remote power steering fluid reservoir as possible.


1

Power Steering Fluid Reservoir Outlet Hose Clamp

2

Power Steering Fluid Reservoir Outlet Hose

3

Power Steering Gear Inlet Hose Retainer

Refer to Fastener Caution .

Procedure

Install 2 NEW power steering gear inlet hose fitting seals.

Tighten

37.5 Nm (28 lb ft)

4

Power Steering Gear Inlet Hose

5

Power Steering Pump Bolt (Qty: 3)

Procedure

Use special tool MKM-6600-1 Small Torque Wrench.

Tighten

22 Nm (16 lb ft)

Special Tools

MKM-6600-1 Small Torque Wrench

For equivalent regional tools, refer to Special Tools .

6

Power Steering Pump

Refer to Using Proper Power Steering Fluid Caution .


Procedure

1. Fill and bleed the power steering system. Refer to Power Steering System Bleeding .

2. Clean any excess power steering fluid from the vehicle.