Power Steering System Test
|
Power Steering System Test
|
Special Tools
J25323-D
Power Steering Analyzer
Check the fluid pressure as follows to determine whether the trouble is in the pump or the gear unit.
Test Procedure
3.
|
Disconnect the high pressure line at the pump. Use a small container to catch any fluid.
|
4.
|
Connect the power steering analyzer to the power steering pressure hose from the power steering pump.
|
5.
|
Place the gear selector lever in PARK if the vehicle is equipped with the automatic transaxle or NEUTRAL if the vehicle is equipped with the manual transaxle.
|
6.
|
Open the gauge valve fully.
|
7.
|
Start and idle the engine.
|
8.
|
Turn the steering wheel from lock to lock several times to warm the fluid to operating temperature.
|
9.
|
Increase the engine speed to 1,500 RPM.
Warning
|
Do not leave the valve fully closed for more than 5 seconds, or the pump could be damaged internally.
|
|
|
|
|
|
11.
|
Immediately open the gauge valve fully.
|
12.
|
Turn the steering wheel all the way to the left and the right. If the pressure is within the specified limits, the problem is not in the pump.
|